In Stock

Custom Lapel Pin

ENAMELIMITATIO HARD ENAMEL PIN WITH GLITTER

☑ The best enduring choice for gift ideas
☑ Eco-friendly option is available
☑ Variety of process performance for choosing
☑ Suitable for events, souvenirs and collections

 

 

INQUIRY

SKU: MT-P08 Categories: ,

Description

WHAT IS IMITATION HARD ENAMEL?

Imitation hard enamel, also called new enamel or imitation cloisonné, is very similar to hard enamel (real cloisonné) no matter in out looking or colors or finishes.  Because of the cheaper price and varies color for choosing, it is more popular than hard enamel in market nowadays.
Our custom hard enamel pins color could be chosen from Pantone color chart, DIC. Color chart even from Aoki cloisonné color chart.
NOTES:
Antique finish is not working well on imitation hard enamel finish. The enamel area dyed by black color, surface will not be shinny.
To avoid colors mixed, enamel area must be surrounded by metal lines min. 0.3mm.

ピンバッジ 制作、ピンバッジ オリジナル 安い
cheap custom enamel pins、bespoke pin badges
badge pins

HOW TO MAKE ENAMEL PINS?

new enamel -Mould

Mould

new enamel -Outline cutting

Outline Cutting

new enamel Coloring

Coloring

new enamel -Baking

Baking

new enamel StoningPolishing

Stoning & Polishing

new enamel -Attachment

Attachment

new enamel-Plating

Plating

new enamel Inspection Packing

Inspection & Packing

Mould:
Molding the metal surface to form the design
Outline cutting:
● Cutting molds are made separately, then cut to the exact outline of the design
● Outline cutting moulds may be required, depending on the complexity of the design
● If a center-hole or cut-out is required, an additional cut-through mould must be used
Coloring:
● Synthetic enamel is carefully hand-filled one color at a time by using different sized syringes.
● Drying
● To prevent defects, a high degree of skill is required in orer to keep each color and the correct amount of enamel in the proper area
Baking:
The metal piece is baked at approximately 230℃ (450℉) for 12 to 15 minutes

Stoning & Polishing:
● Wait until every piece has cooled
● Finish the surface with a carborundum stone until all excess color has been worn away.
● Polish the surface is then polished until smooth and shiny.
Attachment:
Solder attachment glued on to the back of each piece.
Plating:
Plating now can be processed. The quality of plating varies with the time that metal is soaked in the plating liquid.
Inspection & Packing:
All items are strictly inspected before delivery. customer’s satisfaction is guaranteed.

As a most common product of giveaways, Lapel pin can provide not only normal printing process but also many other different ways. Here we are going to show you various production way of pin badge such as soft enamel, imitation hard enamel…etc.

MORE CRAFTS PRESENTATION

Soft enamel pin

Soft enamel

when you run your finger over the top, you’ll feel bumpy

Soft enamel pin-1

Soft enamel with epoxy

adding epoxy dome on surface
to protect enamel

hard enamel pin

New enamel

flat and smooth surface, enamel is on the same level as metal lines

non-filled color

Non-filled color

normally using sandblasting to present level difference

silkscreen printing pin

Silkscreen printing

suitable for design requires in precise solid colors (under 4 colors)

offset printing pin

Offset printing

gradient colors or color more than 5 colors

Soft enamel pin

Soft enamel

when you run your finger over the top, you’ll feel bumpy

Soft enamel pin-1

Soft enamel with epoxy

adding epoxy dome on surface
to protect enamel

hard enamel pin

New enamel

flat and smooth surface, enamel is on the same level as metal lines

non-filled color

Non-filled color

normally using sandblasting to present level difference

silkscreen printing pin

Silkscreen printing

suitable for design requires in precise solid colors (under 4 colors)

offset printing pin

Offset printing

gradient colors or color more than 5 colors

hard enamel & Soft EnamelYou may find that there are some badges in our website have similar looking but have been named differently in soft enamel or imitation hard enamel. You may have a question in your mind: what is the difference between them?

The most difference between soft enamel and hard enamel is the texture.
Soft enamel is laid in the recessed areas and put through ovens to bake it hard. When dry the enamel clings to the edges and recessed below the metal die line. This gives the soft enamel the ‘bumpy’ feel when you run your finger over the top.

Imitation hard enamel – also called new enamel, it raises the enamel higher after baking so can be polished flat to the same level as the metal die lines. The enamel gets a polished look to a very high quality. For the flat surface, client can choose to add printing onto the surface as well, but no epoxy is available for new enamel.

Due to plating process, there are some plating colors which are not available for imitation hard enamel such as brass plating, imitation gold plating and rainbow plating.
★ Click HERE to know more about the difference
should there be any question or need to quote, please feel free to contact us
e-mail:sales@marktex.com.tw

Marktex can offer varies lapel pin back selections for you, here enclosed the most popular lapel pin back fittings for your reference.

fitting pins

★ None of these you want to use? Click here to see more…
should there be any question or need to quote, please feel free to contact us
e-mail:sales@marktex.com.tw

plating color chart

Different plating colors bring different effects to your badge. Besides classic plating colors, Marktex could also offer color plating and rainbow plating, please check plating color chart to see more plating options.
should there be any question or need to quote, please feel free to contact us
e-mail:sales@marktex.com.tw

PackagingWe offer standard individual poly bag packing for our client and also offer in plastic box, velvet box and other packing ways. Customized packing is available, please contact us for details.
should there be any question or need to quote, please feel free to contact us
e-mail:sales@marktex.com.tw

For small quantity orders, we offer transfer in express such as DHL, UPS, FedEx, TNT or EMS. For large quantity, air cargo and sea cargo are also available.

Before starting an order, please send us inquiry along with your design (vector file), size and quantity for quoting reference. You may offer your ideas of what you want to show on your product and we will recommend the best production options according to your requirement. After that we will send you revised artwork for checking details. Once everything is confirmed, we can run on productions.
order

So far we accept payment in wire transfer (T/T) and Paypal.

 

Specifications

Material

iron, copper, brass, zinc alloy

Color

according to Pantone or DIC color chart

Thickness

1.2~3.0mm (depends on size)

Plated

gold, nickel, nickel free, brass, copper plated…etc. or with antique effect

Epoxy

with or without

Packing

individual poly bag













    fitting pins





    You may also like…